Dexter Trailer Slipper Spring Equalizer Kit – 17-3/8" Long – 2" Springs - 1" Bolt
Equalizer and hardware kit for compatible 2" wide slipper spring trailer suspension applications. Built around Dexter equalizer 013-118-03 with the listed center and spring-eye hardware.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Part Number / SKU | 013-118-03-KIT |
| Equalizer Part Number | 013-118-03 |
| Brand / Configuration | Dexter equalizer with listed kit hardware |
| Overall Equalizer Length | 17-3/8" / 17.37" |
| Spring Width | 2" wide slipper springs |
| Quantity Included | 1 equalizer kit with listed hardware |
Fitment / Application
| Category | Details |
|---|---|
| Trailer System | Slipper spring suspension systems using 2" wide slipper springs |
| Axle Spacing Reference | Approximately 42.2" to 42-1/4" center-to-center axle spacing |
| Center Connection | 1" center wet bolt configuration |
| Spring Eye Connection | 5/8" spring-eye bolt connection |
| Fitment Method | Verify equalizer length, spring width, bolt diameters, hanger layout, and axle spacing before ordering. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| 17-3/8" Equalizer | Matches the listed Dexter 013-118-03 length for compatible slipper spring suspension layouts. |
| 2" Spring Fit | Designed for trailer suspensions using 2" wide slipper springs. |
| Hardware Included | Includes the listed center wet bolt, lock nut, spring-eye bolt, and spring-eye nut. |
| Fitment-Focused Kit | Useful for repair or replacement when the existing equalizer and hardware match the listed dimensions. |
Overview
This Dexter slipper spring equalizer kit is intended for compatible trailer suspension systems using 2" wide slipper springs and approximately 42.2" to 42-1/4" axle spacing. The kit is built around equalizer 013-118-03 and includes the listed center and spring-eye hardware for matching suspension repair or replacement work.
R&P Service Insight
Equalizers are geometry-sensitive suspension parts. A small mismatch in equalizer length, bolt size, spring width, or hanger placement can change axle spacing and suspension travel.
- Measure First: Confirm the existing equalizer length before removing the old part.
- Match the Spring: This kit is for 2" wide slipper spring applications.
- Check Hardware Wear: Inspect bolts, bushings, hangers, and spring eyes any time the equalizer is being replaced.
R&P Knowledge Hub
Compatibility: Best matched by part number, overall equalizer length, spring width, bolt diameters, and axle spacing.
Vehicle / System Fit: Slipper spring trailer suspension applications using a 17-3/8" style equalizer and 2" wide slipper springs.
Installation Notes: Support the trailer safely, unload suspension tension as required, and verify all hanger and spring contact points before final assembly.
Performance Insight: The equalizer pivots between axles to transfer movement through the suspension. Correct geometry helps maintain intended load transfer and suspension travel.
Brand & Fitment Note
Selling Brand: Dexter equalizer kit configured with the listed suspension hardware.
Application Reference: Dexter and part number references are used for fitment identification and part matching.
What This Means: This listing is for one 013-118-03-KIT equalizer and hardware kit. Match by the listed measurements and included components before ordering.
Before Ordering: Verify equalizer length, axle spacing, spring width, hanger layout, bolt diameters, and existing part numbers.
R&P Repair Insight
Slipper spring equalizers are commonly replaced when the equalizer, pivot hardware, bushing area, or spring contact surfaces show wear. Do not assume all 2" slipper spring equalizers interchange by spring width alone.
- Length Check: Confirm the old equalizer measures approximately 17-3/8" overall.
- Bolt Check: Confirm the center connection and spring-eye connection match the listed 1" and 5/8" hardware sizes.
- System Check: Inspect the center hanger, front/rear hangers, springs, and opposite-side equalizer for uneven wear.
Features
17-3/8" Equalizer Length
Matches the listed Dexter 013-118-03 equalizer length for compatible slipper spring suspension layouts.
Built for 2" Slipper Springs
Intended for trailer suspension systems using 2" wide slipper springs where the equalizer geometry matches.
1" Center Wet Bolt Setup
Includes the listed 1" center wet bolt and lock nut for the equalizer pivot connection.
Spring-Eye Hardware Included
Includes the listed 5/8" spring-eye bolt and matching nut for the spring-eye connection point.
Included Components
| Quantity | Item |
|---|---|
| 1 | Equalizer — 013-118-03 |
| 1 | 1" wet bolt — 7-136-2 |
| 1 | Lock nut — 006-112-00 |
| 1 | 5/8" spring-eye bolt — 7-181 |
| 1 | 5/8" eye-bolt nut — 006-038-00 |
Diagram Dimensions
| Reference | Measurement |
|---|---|
| A | 17.37" / 17-3/8" overall length |
| D | 2" spring width |
| E | 1" center wet bolt diameter |
| F | 5/8" spring-eye hole diameter |