Dexter 014-074-00 Rubber/Steel Equalizer Bushing - 1" ID x 2-1/8" OD x 3-1/8" Long
Replacement Dexter equalizer bushing for compatible heavy-duty trailer suspension applications. Built with rubber and steel construction and sized for select Dexter equalizers where the original bushing dimensions match.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Part Number / SKU | 014-074-00 |
| Brand | Dexter |
| Product Type | Equalizer bushing |
| Inside Diameter | 1" |
| Outside Diameter | 2-1/8" / approximately 2.11" |
| Overall Length | 3-1/8" / approximately 3.12" |
| Material / Finish | Rubber and steel |
| Quantity Included | 1 bushing |
Fitment / Application
| Category | Details |
|---|---|
| Vehicle / Trailer / System | Trailer suspension equalizer applications |
| Primary Fit | Fits select Dexter equalizers where 014-074-00 is specified |
| Referenced Equalizers | Commonly referenced with Dexter equalizers 013-118-03 and 013-119-03 |
| Common Axle Application | Often listed for Dexter 8,000 lb and 9,000 lb axle suspension applications; verify before ordering |
| Fitment Method | Match part number, equalizer model, inside diameter, outside diameter, and overall length before installation |
| Important Note | Do not order by axle rating alone. Confirm your existing bushing dimensions and equalizer part number before installation. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| Dexter 014-074-00 Reference | Helps identify the correct replacement bushing for compatible Dexter equalizer assemblies. |
| Rubber / Steel Construction | Designed for trailer suspension pivot use where a sleeved rubber and steel bushing is required. |
| Verified Core Dimensions | 1" ID, 2-1/8" OD, and 3-1/8" length support pre-order measurement checks. |
| Single Replacement Component | Listing is for one bushing only, making it suitable for targeted service or repair needs. |
Overview
The Dexter 014-074-00 equalizer bushing is a rubber and steel trailer suspension replacement component used in compatible Dexter equalizer assemblies. This bushing measures 1" inside diameter, 2-1/8" outside diameter, and 3-1/8" long, making measurement verification important before ordering.
R&P Service Insight
Equalizer bushings work at suspension pivot points, so correct sizing matters for proper fit and service life. Match the bushing to the equalizer and pivot hardware rather than relying only on trailer brand or axle rating.
- Measure First: Confirm inside diameter, outside diameter, and length against the removed bushing or service specification.
- Check the Equalizer: Verify the equalizer part number or dimensions before ordering.
- Inspect Related Parts: Check pivot bolts, hangers, equalizer wear, and adjacent suspension hardware during service.
R&P Knowledge Hub
Compatibility: This bushing is associated with Dexter 014-074-00 applications and is commonly referenced for select Dexter equalizers, including 013-118-03 and 013-119-03. Verify before ordering.
Vehicle / System Fit: Trailer suspension equalizer pivot applications using the matching 1" ID x 2-1/8" OD x 3-1/8" long rubber/steel bushing.
Installation Notes: Confirm the old bushing dimensions, equalizer bore condition, and pivot bolt size before installation. Replace worn or damaged related hardware as needed.
Performance Insight: Correct bushing dimensions help maintain proper suspension pivot alignment and reduce unwanted movement at the equalizer connection.
Brand & Fitment Note
Selling Brand: Dexter
Application Reference: Dexter equalizer and axle references are used for compatibility identification only.
What This Means: This listing is for one Dexter 014-074-00 rubber/steel equalizer bushing for compatible trailer suspension applications.
Before Ordering: Verify your equalizer part number, bushing dimensions, pivot bolt size, axle/suspension application, and required quantity before installation.
R&P Repair Insight
When servicing an equalizer bushing, inspect the entire pivot area rather than replacing the bushing in isolation. Worn pivot bolts, enlarged equalizer bores, or damaged hangers can shorten the life of a new bushing.
- Fit Check: The bushing should match the specified 1" ID, 2-1/8" OD, and 3-1/8" length before installation.
- Wear Check: Look for ovaled holes, excessive play, cracked rubber, or damage around the equalizer pivot.
- Quantity Check: This listing includes one bushing only; confirm how many are needed for your repair before ordering.
Features
Dexter 014-074-00 Replacement Bushing
Designed for compatible Dexter equalizer applications where this part number and size are specified.
Rubber and Steel Construction
Sleeved bushing design for trailer suspension pivot service in matching equalizer assemblies.
Verified Measurement Set
Measures 1" inside diameter, 2-1/8" outside diameter, and 3-1/8" long.
Heavy-Duty Suspension Use
Commonly listed for select Dexter heavy-duty equalizer and 8K-9K axle suspension applications; verify fitment before ordering.
Included Components
| Quantity | Item |
|---|---|
| 1 | Dexter 014-074-00 rubber/steel equalizer bushing |
| Not Included | Pivot bolt, nut, washers, equalizer, springs, hangers, shackles, or installation hardware unless separately shown or stated |
Final Verification Note
Trailer suspension parts can vary by axle rating, equalizer model, spring width, and previous repairs. Before ordering, compare your existing bushing and equalizer against the listed part number and dimensions: 1" ID, 2-1/8" OD, and 3-1/8" overall length.
Order With Confidence
R&P Carriages helps trailer owners and shops source the right suspension service parts with clear dimensions, fitment notes, and practical verification guidance. Confirm your measurements and application, then add this Dexter 014-074-00 bushing to your repair order.