10-Pack Brophy LRB5 3/8" Bolt-On D-Ring Tie Down Anchors 6,000 lb Zinc
Ten heavy-duty surface mount D-ring anchors for outfitting trailers, truck beds, decks, and cargo-control layouts with multiple secure tie-down points. Forged steel construction with zinc-plated finish provides strength, corrosion resistance, and dependable utility for repeated trailer use. Important Note: Please refer to measurement visual in the listing photos.
Overview
This LOT OF 10 Brophy LRB5 set gives you ten matching bolt-on D-ring anchor points for larger cargo-control projects, trailer deck outfitting, shop builds, fleet maintenance, utility trailers, equipment trailers, truck beds, and flat-bed surfaces. A 10-pack is a strong choice when you need consistent tie-down hardware across multiple mounting locations rather than mixing anchor styles or ratings.
R&P Service Insight
For larger installs, consistency matters. Using the same anchor style across the trailer helps keep working load ratings, mounting hole layout, and replacement planning more predictable.
- Mounting Holes: Each anchor features 7/16" square holes designed specifically for 3/8" carriage bolts.
- Finish: Zinc plating provides strong protection against moisture, road grime, and regular trailer exposure.
- Safety: Each anchor has a 2,000 lb Working Load Limit when installed and used properly within rated limits.
R&P Knowledge Hub
Compatibility: Surface-mount bolt-on D-ring anchors for trailer floors, truck beds, flat-bed surfaces, work decks, and other properly reinforced flat mounting locations.
Vehicle / System Fit: Designed for cargo-control applications where multiple heavy-duty tie-down points are needed for equipment, ATVs, tools, machinery, and heavy loads.
Installation Notes: Please refer to the measurement visual in the listing photos. Verify bracket size, bolt hole spacing, bolt size, mounting surface strength, spacing pattern, and anchor placement before installation.
Performance Insight: Each forged 3/8" steel ring and zinc-plated bracket provides strength, durability, and corrosion resistance for regular trailer and cargo-control use.
Brand & Fitment Note
Selling Brand: Brophy
Application Reference: This listing describes a 10-pack of bolt-on D-ring anchors for cargo securement applications where measurements, mounting points, and installation surfaces are appropriate.
What This Means: This listing is for ten Brophy LRB5 3/8" bolt-on D-ring tie down anchors.
Before Ordering: Verify bracket dimensions, hole spacing, bolt size, mounting surface strength, required Working Load Limit, cargo weight, tie-down angle, strap rating, and the number of anchors needed for the cargo being secured.
R&P Repair Insight
Tie-down hardware should be selected and installed as part of the full cargo-control system. The anchors, fasteners, backing structure, straps, load direction, and mounting surface all work together to determine real-world securement strength.
- Surface Check: Do not rely on thin sheet metal, weak decking, or damaged trailer flooring as the only support for heavy tie-down points.
- Fastener Check: The square bracket holes are designed for 3/8" carriage bolts; confirm bolt length, grade, backing, and nut/washer setup for your installation.
- Layout Check: For a 10-anchor install, plan spacing before drilling so cargo points are useful, balanced, and not placed too close to weak edges or unsupported decking.
Key Features
Lot of 10 Matching Anchors
Includes ten Brophy LRB5 bolt-on D-ring anchors, ideal for outfitting a trailer deck, shop project, fleet unit, or multi-point cargo-control setup.
Surface Mount Design
Bolts directly onto flat surfaces; no recessed routing or large cutout required for installation.
3/8" Forged Steel Rings
Forged steel loops offer high tensile strength and resist bending under load when used within rated limits.
Corrosion Resistant
Bright zinc plating helps protect the anchors from moisture, road grime, road salt, and regular outdoor trailer use.
Specifications
| Specification | Detail |
|---|---|
| Part Number | LRB5 |
| Listing SKU | LRB5-LOTOF10 |
| Brand | Brophy |
| Product Type | Bolt-On D-Ring Tie Down Anchor - 10 Pack |
| Quantity Included | 10 D-ring anchor assemblies |
| Application | Trailer floors, truck beds, flat-bed surfaces, utility decks, cargo-control mounting points |
| Ring Diameter | 3/8" each |
| Break Strength | 6,000 lbs each |
| Working Load Limit | 2,000 lbs each |
| Material / Finish | Zinc Plated Forged Steel |
| Bolt Hole Size | 7/16" square holes; fits 3/8" carriage bolts |
Fitment / Application
| Category | Details |
|---|---|
| Vehicle / System | Trailer cargo-control systems, truck beds, utility trailers, equipment trailers, enclosed trailers, and flat-bed surfaces |
| Primary Fit | Surface-mount tie-down anchor applications requiring bolt-on D-rings |
| Common Uses | Securing ATVs, equipment, tools, machinery, parts, and heavy loads when used with properly rated straps and mounting hardware |
| Notes | Please refer to the measurement visual in the listing photos. Confirm mounting location strength, anchor spacing, tie-down pattern, and required WLL before installation. |
Detailed Measurements
| Key Dimension | Measurement |
|---|---|
| (A) Bracket Length | 2 3/4" each |
| (B) Bracket Width | 2 3/4" each |
| (C) Inside Width | 2" each |
| (D) Inside Depth | 2" each |
| (E) Bolt Hole Center | 1 7/8" each |
| Bolt Hole Size | 7/16" square hole; fits 3/8" carriage bolts |
Included Components
| Quantity | Item |
|---|---|
| 10 | Brophy LRB5 bolt-on D-ring tie down anchor assemblies |
| 10 | 3/8" forged steel D-rings |
| 10 | Surface-mount brackets with 7/16" square mounting holes |
| Not Included | Mounting bolts, nuts, washers, backing plates, straps, and installation hardware unless separately shown or stated |
Safety Note
Tie-down rings must be chosen according to their safe Working Load Limit. The weight of the cargo being secured must not exceed the properly calculated WLL of the anchors being used, and anchor placement, tie-down angle, strap rating, fasteners, backing support, and mounting structure all matter.
Each LRB5 anchor in this 10-pack is rated at a 2,000 lb Working Load Limit when installed and used properly within the full securement system. Ten anchors may represent up to 20,000 lbs of combined individual anchor WLL only when each anchor, mounting surface, fastener setup, strap, and load angle is properly rated and configured. Do not assume total combined capacity applies to every load situation.
