1000# Torsion Half Axle LOW PROFILE 22 UP angle Right Side Trailer Motorcycle (A1788265)

Dexter

Regular price $116.99

R and P Carriages 270 E Jackson St Seneca IL 61360
              815-357-****
1000# Capacity Torsion half axle (2000# Per pair)
Part Number: A1788265

You are looking at custom built Torsion "half axles" which allow you to "build your own axle" use any way you want! 


These axle allow them to be mounted to any width trailer, just bolting on under the frame. They are rated to 1000# per wheel (2000# Per pair) they come stock with common 5 bolt, 4-1/2" Bolt circle hubs. We can also custom build the arm at different "start angles" to raise or lower your trailer floor. 

Arm angle is about 22 degrees up unloaded
Tube size measures about 2-1/8"
Custom Axles available for extra cost. It is about 3-4 week build time and the axle is non-returnable

Basic installation dimensions are two angle brackets, with hole center front to back (on the bracket) of 7-1/2" Center to center, and the brackets are spaced 14-1/2" bolt center to center length wise. At rest, the center of the wheel will be about 3-1/2" above the bottom of your trailer frame. Figure a rise of about 1" under load, and a extra 2-1/2" of room for arm swing when you hit a bump.

Comes with Lug nuts!
(1) RIGHT SIDE ONLY

**Picture measurements are of the left side but will be the same**

  click on the picture for a larger image
  click on the picture for a larger imageclick on the picture for a larger image
click on the picture for a larger image  click on the picture for a larger image
click on the picture for a larger image  click on the picture for a larger image
click on the picture for a larger image   
   

We have Lots of axle parts, IN STOCK!


Both left and right, in many load ratings!
click for larger image