1000# Capacity Torsion half axle (2000# Per pair)
(1) LEFT SIDE ONLY
You are looking at custom built Torsion "half axles" which allow you to "build your own axle" use any way you want!
This ad is for one "half axle" (one Left), but if you need two, click here.
These axle allow them to be mounted to any width trailer, just bolting on under the frame. They are rated to 1000# per wheel (2000# Per pair) they come stock with common 5 bolt, 4-1/2" Bolt circle hubs. We can also custom build the arm at different "start angles" to raise or lower your trailer floor.
Arm angle is about 22 degrees up unloaded
Tube size measures about 2-1/8"
Custom Axles available for extra cost. It is about 3-4 week build time and the axle is non-returnable
Basic installation dimensions are two angle brackets, with hole center front to back (on the bracket) of 7-1/2" Center to center, and the brackets are spaced 14-1/2" bolt center to center length wise. At rest, the center of the wheel will be about 3-1/2" above the bottom of your trailer frame. Figure a rise of about 1" under load, and a extra 2-1/2" of room for arm swing when you hit a bump.
Comes with Lug nuts!
Click on any picture below for a larger picture: