POWERED BY R&P CARRIAGES

Need A Trailer Part®

10k Short Lippert Hub/Drum Kit with Bearings, Seal, Lug Nuts, Seal, and Oil Cap (791399-KIT)

$389.99
Available to order

Enter the quantity you need to check availability.

Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: 791399-KIT
PRODUCT INFORMATION

Product Details

10K Short Spindle Lippert Hub Drum Kit with Bearings, Seal, Lug Nuts, and Oil Cap
10K Oil-Bath Hub / Drum Assembly

10K Short Spindle Lippert Hub/Drum Kit – Oil Bath – 8 on 6.5" – 791399-KIT

A complete oil-bath hub and drum kit for one wheel position on compatible 10,000 lb short-spindle Lippert and Dexter axles, including bearings, seal, oil cap, and lug nuts for a ready-to-service setup.

Part Number: 791399-KIT 8 on 6-1/2" Bolt Pattern

Overview

The 791399-KIT is a complete 10,000 lb rated oil-bath hub and drum assembly designed for Lippert and Dexter 10K short-spindle axles. This kit services one wheel position and includes installed bearing races, inner and outer bearings, oil seal, thread-on aluminum oil cap with sight glass, and eight lug nuts.

Designed for 12-1/4" × 3-3/8" electric or hydraulic brake assemblies and the standard 8 on 6-1/2" bolt pattern. The drum is machined and balanced to support consistent braking performance.

R&P Service Insight

Oil-bath hub and drum assemblies like this are typically replaced because of wear, seal failure, bearing damage, or service mismatch rather than a single sudden event.

  • Wear: Bearing surfaces, seal contact points, and drum braking surfaces all wear over time under heavy axle loads.
  • Exposure: Oil contamination, water intrusion, and heat buildup can shorten service life if the hub is run with improper lubricant level.
  • Load Stress: High-capacity trailer use places continuous stress on bearings, races, and braking surfaces, especially if fitment is not matched to the correct spindle type.

R&P Knowledge Hub

10K short-spindle axles use a specific oil-bath hub configuration that differs from grease-packed systems. Oil-bath hubs use a sealed cap with sight glass to maintain proper lubricant level and cooling under heavy loads. This kit fits short 5" 10K spindles using 387A inner and 25580 outer bearings.

It will not fit long-spindle 10K axles or grease-type hubs. Always confirm spindle type, brake size (12-1/4" × 3-3/8"), and bearing numbers before ordering.

Features

10K Short-Spindle Fit

Built for compatible 10,000 lb Lippert and Dexter oil-bath axles using the short 5" spindle style.

Machined and Balanced Drum

Hub and drum assembly is machined and balanced to support smooth, consistent braking performance.

Service Kit Included

Comes with installed races, inner and outer bearings, oil seal, oil cap, and eight lug nuts.

Brake Compatibility

Designed for 12-1/4" × 3-3/8" electric or hydraulic brake assemblies with 8 on 6-1/2" wheel fitment.

Repair Video
10K GD Hub Repair
Watch the repair walk-through for 10K GD hub service with a rounded-corner embedded player. Autoplay is enabled and muted for smoother inline playback.

Specifications

Specification Detail
Part Number 791399-KIT
Axle Rating 10,000 lb (Oil Bath)
Brake Compatibility 12-1/4" × 3-3/8" (Electric or Hydraulic)
Bolt Pattern 8 on 6-1/2"
Hub Pilot Diameter 4.75"
Spindle Type Short 10K (5" Spindle)
Inner Bearing 387A (2.250" I.D.)
Outer Bearing 25580 (1.750" I.D.)
Races (Installed) 382A / 25520
Oil Seal 10-51 (2.875" I.D. × 3.880" O.D.)
Oil Cap Thread-On Aluminum with Sight Glass
Lug Nuts 8 Included (5/8-18 Thread)
Approximate Weight 65 lb (Per Assembly)

Includes

Quantity Item
1 Hub/Drum Assembly with Installed Races
1 Inner Bearing 387A
1 Outer Bearing 25580
1 Oil Seal 10-51
1 Thread-On Oil Cap
8 Lug Nuts
Verify specifications before installation.
10K short spindle Lippert hub drum kit 791399-KIT oil bath 8 on 6.5 hub drum assembly 387A 25580 10-51 seal 10K trailer hub drum short 5 inch spindle 10K GD hub repair video

Related Parts & Kits

Check fitment, measurements, and kit contents before ordering. Related parts may not be required for your repair.
Looking up part numbers in our catalog…
Your repair list1 item selected

Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.

BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH Ariah Granados Ariah’s handwritten signature
DIGITAL PRESENTATION & DEVELOPMENT Ken Martin Ken’s handwritten signature
ONLINE SALES & QUALITY ASSURANCE Rayn Fisher
WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTSGOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke HeiserOCT 2026
RV KEYSGOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa ROCT 2026
AXLE & LEAF SPRINGSGOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory StrubertOCT 2026
Showing 3 of 50

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.