POWERED BY R&P CARRIAGES

R & P Carriages

One 7.75" Long Equalizer - 9/16" Hole - 1-3/4" Wide Double-Eye Leaf Springs (EQ-E1)

$12.99
Available to order

Enter the quantity you need to check availability.

Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: EQ-E1
PRODUCT INFORMATION

Product Details

Trailer Suspension Equalizer / Double-Eye Spring Hardware

One 7.75" Long Equalizer - 9/16" Hole - 1-3/4" Wide Double-Eye Leaf Springs

One curved trailer suspension equalizer for compatible tandem- or triple-axle trailers using 1-3/4" wide double-eye leaf springs with 9/16" spring eyes. Designed to connect spring assemblies and allow movement between axles for smoother load transfer.

Part Number: EQ-E1 7-3/4" Long Equalizer 9/16" Bolt Holes Quantity: 1

Key Measurements & Specs

Specification Detail
Part Number / SKU EQ-E1
Product Type Curved trailer suspension equalizer
Overall Length 7-3/4"
Spring Width Compatibility For 1-3/4" wide double-eye leaf springs
Center Bolt Hole Diameter 9/16"
Left / Right Bolt Hole Diameter 9/16"
Material / Finish Steel
Quantity Included 1 equalizer

Fitment / Application

Category Details
Trailer System Leaf spring suspension for tandem- or triple-axle trailers
Primary Fit Compatible setups using 1-3/4" wide double-eye springs with 9/16" spring eyes
Fitment Method Match equalizer length, bolt hole diameter, spring width, hanger spacing, and shackle hardware before ordering
Important Note Verify before ordering. Equalizers must match the trailer suspension geometry already on the trailer.

Top Features

Feature Buyer Benefit
7-3/4" Length Matches compatible suspension layouts requiring this equalizer size
9/16" Bolt Holes Works with compatible 9/16" suspension bolts and spring eye hardware
Curved Equalizer Design Allows controlled movement between axles in multi-axle trailer suspension systems
Double-Eye Spring Application Built for compatible 1-3/4" wide double-eye leaf spring setups

Overview

The EQ-E1 is a 7-3/4" long curved trailer suspension equalizer used with compatible 1-3/4" wide double-eye leaf springs. It connects the spring assemblies on tandem- or triple-axle trailers and helps allow the suspension to articulate as the trailer travels over uneven surfaces.

R&P Service Insight

Equalizer fitment is measurement-driven. Before replacing one, compare the old equalizer against this part and confirm bolt size, hole spacing, spring width, and the surrounding shackle hardware.

  • Measure first: Confirm the 7-3/4" length against the existing equalizer or suspension diagram.
  • Check bolt diameter: This listing specifies 9/16" center and side bolt holes.
  • Inspect related parts: Worn shackles, bolts, bushings, or hangers can affect alignment and suspension movement.

R&P Knowledge Hub

Compatibility: Intended for compatible tandem- or triple-axle trailer suspension systems using 1-3/4" wide double-eye leaf springs with 9/16" spring eyes.

Vehicle / System Fit: Trailer leaf spring suspension equalizer application. Verify suspension geometry before ordering.

Installation Notes: Replace suspension components with the trailer safely supported. Confirm bolt size, shackle length, hanger condition, and spring eye condition during service.

Performance Insight: The equalizer helps distribute suspension movement between axles, which can improve ride control and reduce harsh transfer through the trailer frame when the suspension geometry is correct.

Brand & Fitment Note

Selling Brand: R&P Carriages

Application Reference: Trailer suspension fitment is based on measurements and spring configuration, not by trailer brand alone.

What This Means: This listing is for one EQ-E1 curved trailer suspension equalizer for compatible double-eye leaf spring applications.

Before Ordering: Verify equalizer length, 9/16" bolt hole size, 1-3/4" spring width, hanger spacing, shackle setup, and all related suspension hardware before installation.

R&P Repair Insight

Equalizers are commonly replaced during suspension rebuilds when the original part is worn, elongated at the bolt holes, bent, damaged, or no longer matches the trailer’s suspension geometry. Always inspect the connected hardware at the same time.

  • Bolt hole check: Elongated or wallowed holes can cause excess suspension play.
  • Spring check: Confirm the springs are 1-3/4" wide double-eye springs with 9/16" spring eyes.
  • System check: Match both sides of the suspension so the trailer tracks and rides evenly.

Features

7-3/4" Long Equalizer

Replacement equalizer for compatible suspension layouts requiring a 7-3/4" long curved equalizer.

9/16" Center Hole

Center bolt hole is specified at 9/16" for compatible center hanger mounting hardware.

9/16" Side Holes

Left and right bolt holes are specified at 9/16" for compatible shackle and spring eye hardware.

Double-Eye Spring Fitment

Designed for compatible 1-3/4" wide double-eye leaf spring suspension systems on multi-axle trailers.

Included Components

Quantity Item
1 7-3/4" curved trailer suspension equalizer, part number EQ-E1
Not Included Mounting bolts, shackle straps, nuts, bushings, springs, hangers, and other suspension hardware unless purchased separately
EQ-E1 7.75 inch curved trailer suspension equalizer dimension reference
Important Fitment Note: Verify all measurements, bolt hole diameters, spring width, hanger spacing, shackle hardware, and suspension geometry before installation. Trailer suspension parts should be matched by actual measurements and application requirements, not by appearance alone.
EQ-E1 trailer equalizer, 7.75 inch equalizer, 7-3/4 inch curved equalizer, trailer suspension equalizer, double eye spring equalizer, 1-3/4 inch leaf spring equalizer, 9/16 inch bolt hole equalizer, tandem axle trailer equalizer, triple axle trailer equalizer, trailer leaf spring suspension part

Related Parts & Kits

Check fitment, measurements, and kit contents before ordering. Related parts may not be required for your repair.
Looking up part numbers in our catalog…
Your repair list1 item selected

Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.

BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH Ariah Granados Ariah’s handwritten signature
DIGITAL PRESENTATION & DEVELOPMENT Ken Martin Ken’s handwritten signature
ONLINE SALES & QUALITY ASSURANCE Rayn Fisher
WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTSGOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke HeiserOCT 2026
RV KEYSGOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa ROCT 2026
AXLE & LEAF SPRINGSGOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory StrubertOCT 2026
Showing 3 of 50

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.