Trailer Tongue Jack / A-Frame Jack / Top Wind Jack
2,000# A-Frame Camper Trailer Tongue Jack FREE SHIPPING Lift top wind
Replacement top wind A-frame jack for common 3-bolt drop-in trailer and camper tongue jack applications with a 2.2" center hole. Built for buyers replacing a worn, bent, seized, or missing manual tongue jack.
Part Number: EA2000 2,000 lb Capacity Top Wind A-Frame Mount
Key Measurements & Specs
| Specification |
Detail |
| Part Number / SKU |
EA2000 |
| Product Type |
Top wind A-frame trailer jack |
| Rated Capacity |
2,000 lb |
| Overall Length Retracted |
21" |
| Overall Length Extended |
36" |
| Tube Travel |
14" |
| Quantity Included |
1 jack |
Fitment / Application
| Category |
Details |
| Trailer Type |
Common A-frame trailer and camper tongue jack applications |
| Mount Style |
Drop-in A-frame mount with 3-bolt pattern |
| Center Hole |
Common 2.2" jack hole |
| Mount Plate |
1/4" thick, 5" x 5" x 5" triangular A-frame mount |
| Bolt Pattern |
3-1/4" from center hole to center hole |
| Important Note |
Verify your center hole size, 3-bolt pattern, jack height, and needed foot base or caster before ordering. |
Top Features
| Feature |
Buyer Benefit |
| 2,000 lb Rating |
Good replacement choice for many light-duty trailer tongue jack applications. |
| Top Wind Handle |
Manual crank design keeps operation simple and familiar. |
| 14" Travel |
Provides lift range for hitching, unhitching, and leveling the trailer tongue. |
| Common A-Frame Pattern |
Fits many standard 3-bolt A-frame jack mounts when measurements match. |
Overview
The EA2000 is a 2,000 lb top wind A-frame trailer jack for common drop-in trailer and camper tongue jack mounts. It is intended for A-frame couplers using the common 2.2" center hole and 3-bolt mounting pattern. This is a practical replacement jack for trailers where the original jack is worn, hard to crank, damaged, or missing.
R&P Service Insight
Before replacing a tongue jack, confirm both the jack rating and the physical mount. Most issues come from assuming all A-frame jacks are identical without checking the center hole, bolt pattern, and working height.
-
Measure First: Confirm your trailer has the common 2.2" center hole and matching 3-bolt mount.
-
Check Height: This jack measures 21" retracted and 36" extended overall.
-
Foot Base: Foot base is not included, so reuse a compatible base or order one separately if needed.
R&P Knowledge Hub
Compatibility: Designed for common A-frame trailer and camper tongue jack applications where the jack hole, 3-bolt pattern, and height requirements match.
Trailer / System Fit: Common drop-in A-frame jack mount with 2.2" center hole and 3-bolt pattern.
Installation Notes: Verify bolt pattern, jack clearance, handle clearance, coupler layout, and whether your trailer needs a foot base or wheel caster before installation.
Performance Insight: The 14" travel range helps raise and lower the trailer tongue for normal hitching, unhitching, and parked trailer support.
Brand & Fitment Note
Selling Brand: These jacks are sourced from Cequent Group, known for trailer equipment brands such as Fulton and Bulldog. The name sticker on the jack may vary.
Application Reference: Brand names are used as sourcing and application references only. The physical jack and fitment measurements should be verified before ordering.
What This Means: This listing is for one EA2000 2,000 lb top wind A-frame trailer jack. The exact label or name sticker on the jack may vary, but the jack is sold by the listed specifications.
Before Ordering: Verify capacity, mounting hole size, bolt pattern, retracted length, extended length, travel, and needed accessories before installation.
R&P Repair Insight
A-frame jacks are often replaced when the crank becomes difficult, the inner tube is bent, the jack no longer supports the tongue properly, or the trailer needs a fresh manual jack for reliable use.
-
Capacity Check: Match the jack rating to the trailer tongue load requirement, not the full trailer GVWR.
-
Mount Check: Confirm the trailer uses the common 3-bolt A-frame mounting pattern before ordering.
-
Accessory Check: Foot base is not included; confirm whether your existing foot or caster will fit your setup.
Features
2,000 lb Top Wind Jack
Manual top wind A-frame jack with a 2,000 lb rating for compatible trailer tongue applications.
Common Drop-In A-Frame Fit
Designed for common trailer and camper A-frame jack mounts with a 2.2" center hole and 3-bolt layout.
14" Tube Travel
Provides useful lift range for hitching, unhitching, and supporting the trailer tongue while parked.
Replacement-Friendly Measurements
21" overall retracted length and 36" overall extended length help buyers compare against their existing jack.
Included Components
| Quantity |
Item |
| 1 |
2,000 lb top wind A-frame trailer jack, part number EA2000 |
| Not Included |
Foot base |
| Not Included |
Wheel caster, mounting hardware, and additional accessories unless otherwise shown or selected separately |
Important Fitment Note: Foot base is not included. Verify your existing jack measurements, trailer tongue clearance, 2.2" center hole, 3-bolt A-frame pattern, retracted height, extended height, and accessory needs before ordering.
EA2000 2000 lb top wind A-frame trailer jack, 2,000 pound trailer tongue jack, A-frame camper jack, manual top wind jack, drop in trailer jack, 2.2 inch hole trailer jack, 3 bolt A-frame jack, replacement tongue jack, trailer jack without foot base, Cequent style A-frame jack, Fulton Bulldog style trailer jack application reference.
