At a Glance

> Safety: Secure loads based on the 15,000 lb Working Load Limit (WLL), not the breaking strength.
> Installation: Weld-on only; ensure the mounting surface is ground clean before welding for maximum penetration.
> Finish: Arrives as raw steel; must be painted or coated after welding to prevent surface rust.
> Not for Lifting: Rated for cargo lashing ONLY. Do not use for overhead lifting or recovery snatching/towing.
> Space Requirement: Ensure you have a clear 5" x 5" flat steel surface for the ring's footprint.
Brand: Brophy
SKU: LRW3

Before You Order

Match the part number, measurements and connection points that apply to your trailer.

Opening	Measure the existing roof or wall opening.
Flange	Confirm overall and flange dimensions.
Operation	Confirm powered, manual or fixed operation.
Mount / Power	Verify mounting and electrical requirements.

Product Details

Heavy-Duty Cargo Securement / Lashing Anchors

Brophy 1 " Weld-On D-Ring Lashing Anchor | 46,000 lb Rating | Forged 1045 Steel

A massive, forged 1045 steel lashing point designed for permanent weld-on installation on heavy equipment haulers, lowboys, and flatbed trailers.

Part Number: LRW3 46,000 LB Breaking Strength 15,000 LB Working Load Limit

Overview

The Brophy LRW3 is a heavy-duty, forged lashing ring engineered for high-capacity cargo securement. Unlike bent or cast alternatives, this forged 1045 steel ring offers superior impact resistance and structural integrity under extreme tension. Its 1-inch thick ring and 5x5 footprint make it a staple for flatbed trailers and industrial trucks. This raw-finish, two-piece unit consists of the D-ring and a heavy-duty mounting bracket, ready for professional welding.

R&P Service Insight

This lashing ring is built for the most demanding transport environments where failure is not an option.

Safety: Secure loads based on the 15,000 lb Working Load Limit (WLL), not the breaking strength.
Installation: Weld-on only; ensure the mounting surface is ground clean before welding for maximum penetration.
Finish: Arrives as raw steel; must be painted or coated after welding to prevent surface rust.

R&P Knowledge Hub

Compatibility: Engineered for use with heavy-duty Grade 70 or Grade 80 transport chains and industrial ratchet binders.

Vehicle / System Fit: Universal weld-on application for steel-frame trailers, lowboys, flatbeds, and heavy machinery decks.

Installation Notes: Must be installed by a professional welder to maintain the 46K rating. Not suitable for wood or aluminum frames without steel reinforcement plates.

Performance Insight: The 1045 Forged Steel construction provides necessary durability to resist warping or cracking when securing heavy machinery or steel coils.

Brand & Fitment Note

Selling Brand: Brophy / R&P Carriages

Application Reference: Application descriptions for trailers (Lowboy, Flatbed) refer to compatibility based on steel frame construction and mounting space.

What This Means: This is a genuine Brophy heavy-duty component, designed for universal industrial applications that support weld-on steel attachments.

Before Ordering: Verify you have a minimum 5" x 5" flat steel surface for the mounting footprint and that your frame can support a 15,000 lb WLL.

R&P Safety & Fitment Check

Crucial checks to perform before completing your purchase and installation:

Not for Lifting: Rated for cargo lashing ONLY. Do not use for overhead lifting or recovery snatching/towing.
Space Requirement: Ensure you have a clear 5" x 5" flat steel surface for the ring's footprint.
Load Rating: Verify your total load requirements do not exceed the Working Load Limit (WLL) of 15,000 lbs per anchor.

Features

Forged Strength

Manufactured from forged ASTM 1045 steel for superior resistance to impact and deformation compared to cast rings.

Two-Piece Design

Includes a massive 1" diameter D-ring and a heavy-duty weld-on mounting bracket (clip) for a complete setup.

Compact Profile

The 5" x 5" footprint delivers massive load capacity without taking up excessive trailer rail space.

Industrial Ready

Perfectly suited for securing heavy machinery, vehicles, and steel coils on industrial haulers.

Specifications

Specification	Detail
Part Number	LRW3
Brand	Brophy
Product Type	Weld-On D-Ring
Rating (MBS)	46,000 lbs
Working Load Limit	15,000 lbs
Material / Finish	Forged 1045 Steel / Raw
Ring Diameter	1 Inch
Total Weight	Approx. 4.4 lbs

Dimensions

Category	Details
Outer Footprint	5" Height x 5" Width
Inner Clearance	3" High x 3" Wide
Bracket Thickness	0.5" Thick
Bracket Width	2.25" Wide
Notes	Raw steel - Professional weld required for full capacity.

Included Components

Quantity	Item
1	1" Diameter Forged Steel D-Ring
1	Heavy Duty Weld-on Mounting Bracket (Clip)

Verification Note: Verify your trailer's frame material and weldable surface area before purchasing. This product requires professional welding installation on a steel surface to achieve its rated 46,000 lb capacity. Not for use on aluminum or wood.

Shop All Cargo Anchors

Brophy 1 " Weld-On D-Ring Lashing Anchor | 46,000 lb Rating | Forged 1045 Steel (LRW3)