POWERED BY R&P CARRIAGES

Need a Trailer Part

4-Pack Brophy LRB5 3/8" Bolt-On D-Ring Tie Down Anchors 6,000 lb Zinc (LRB5-LOTOF4)

$34.99
Available to order

Enter the quantity you need to check availability.

LOCAL PICKUP ONLY Available for local pickup from R&P Carriages in Seneca, Illinois.
Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: LRB5-LOTOF4
PRODUCT INFORMATION

Product Details

Heavy Duty Trailer Tie Down / Cargo Control

4-Pack Brophy LRB5 3/8" Bolt-On D-Ring Tie Down Anchors 6,000 lb Zinc

Four heavy-duty surface mount D-ring anchors designed for building a complete cargo restraint setup. Forged steel construction with zinc-plated finish for strength, corrosion resistance, and dependable trailer or truck-bed tie-down performance. Important Note: Please refer to measurement visual in the listing photos.

SKU: LRB5-LOTOF4 Lot of 4 Anchors 6,000 lb Break Strength Each 2,000 lb WLL Each 3/8" Forged Steel Rings

Overview

This LOT OF 4 Brophy LRB5 set gives you four matching bolt-on D-ring anchor points for trailer floors, truck beds, flat-bed surfaces, utility trailers, equipment trailers, and other properly reinforced cargo-control mounting locations. A 4-pack is ideal when creating a full tie-down pattern around a load, adding corner anchor points, or outfitting a trailer deck with multiple securement locations.

R&P Service Insight

When mounting tie-downs, your anchor system is only as strong as the surface it is attached to. We always recommend bolting through structural members or properly reinforced backing plates whenever possible.

  • Mounting Holes: Each anchor features 7/16" square holes designed specifically for 3/8" carriage bolts.
  • Finish: Zinc plating provides strong protection against moisture, road grime, and regular trailer use.
  • Safety: Each anchor has a 2,000 lb Working Load Limit when installed and used properly within rated limits.

R&P Knowledge Hub

Compatibility: Surface-mount bolt-on D-ring anchors for trailer floors, truck beds, flat-bed surfaces, and other properly reinforced flat mounting locations.

Vehicle / System Fit: Designed for cargo control applications where multiple heavy-duty tie-down points are needed for equipment, ATVs, tools, machinery, and heavy loads.

Installation Notes: Please refer to the measurement visual in the listing photos. Verify bracket size, bolt hole spacing, bolt size, mounting surface strength, and anchor placement before installation.

Performance Insight: Each forged 3/8" steel ring and zinc-plated bracket provides strength, durability, and corrosion resistance for regular trailer and cargo-control use.

Brand & Fitment Note

Selling Brand: Brophy

Application Reference: This listing describes a 4-pack of bolt-on D-ring anchors for cargo securement applications where measurements, mounting points, and installation surfaces are appropriate.

What This Means: This listing is for four Brophy LRB5 3/8" bolt-on D-ring tie down anchors.

Before Ordering: Verify bracket dimensions, hole spacing, bolt size, mounting surface strength, required Working Load Limit, cargo weight, tie-down angle, and the number of anchors needed for the cargo being secured.

R&P Repair Insight

Tie-down hardware should be selected and installed as part of the full cargo-control system. The anchors, fasteners, backing structure, straps, and mounting surface all work together to determine real-world securement strength.

  • Surface Check: Do not rely on thin sheet metal, weak decking, or damaged trailer flooring as the only support for heavy tie-down points.
  • Fastener Check: The square bracket holes are designed for 3/8" carriage bolts; confirm bolt length, grade, backing, and nut/washer setup for your installation.
  • Load Check: Choose tie-down rings according to their safe Working Load Limit and the weight of the cargo being secured.

Key Features

Lot of 4 Matching Anchors

Includes four Brophy LRB5 bolt-on D-ring anchors, ideal for creating corner tie-down points or adding multiple securement locations.

Surface Mount Design

Bolts directly onto flat surfaces; no recessed routing or large cutout required for installation.

3/8" Forged Steel Rings

Forged steel loops offer high tensile strength and resist bending under load when used within rated limits.

Corrosion Resistant

Bright zinc plating helps protect the anchors from moisture, road grime, road salt, and regular outdoor trailer use.

Specifications

Specification Detail
Part Number LRB5
Listing SKU LRB5-LOTOF4
Brand Brophy
Product Type Bolt-On D-Ring Tie Down Anchor - 4 Pack
Quantity Included 4 D-ring anchor assemblies
Application Trailer floors, truck beds, flat-bed surfaces, cargo-control mounting points
Ring Diameter 3/8" each
Break Strength 6,000 lbs each
Working Load Limit 2,000 lbs each
Material / Finish Zinc Plated Forged Steel
Bolt Hole Size 7/16" square holes; fits 3/8" carriage bolts

Fitment / Application

Category Details
Vehicle / System Trailer cargo-control systems, truck beds, utility trailers, equipment trailers, and flat-bed surfaces
Primary Fit Surface-mount tie-down anchor applications requiring bolt-on D-rings
Common Uses Securing ATVs, equipment, tools, machinery, and heavy loads when used with properly rated straps and mounting hardware
Notes Please refer to the measurement visual in the listing photos. Confirm mounting location strength, anchor spacing, and required WLL before installation.

Detailed Measurements

Key Dimension Measurement
(A) Bracket Length 2 3/4" each
(B) Bracket Width 2 3/4" each
(C) Inside Width 2" each
(D) Inside Depth 2" each
(E) Bolt Hole Center 1 7/8" each
Bolt Hole Size 7/16" square hole; fits 3/8" carriage bolts

Included Components

Quantity Item
4 Brophy LRB5 bolt-on D-ring tie down anchor assemblies
4 3/8" forged steel D-rings
4 Surface-mount brackets with 7/16" square mounting holes
Not Included Mounting bolts, nuts, washers, backing plates, straps, and installation hardware unless separately shown or stated

Safety Note

Tie-down rings must be chosen according to their safe Working Load Limit. The weight of the cargo being secured must not exceed the combined WLL of the anchors being used, and anchor placement, tie-down angle, strap rating, fasteners, and mounting structure all matter.

Each LRB5 anchor in this 4-pack is rated at a 2,000 lb Working Load Limit when installed and used properly within the full securement system. Using four anchors may provide up to 8,000 lbs combined WLL only when all anchors, mounting surfaces, fasteners, straps, and load angles are properly rated and configured.

Important Note: Please refer to the measurement visual in the listing photos. Verify all measurements, bracket dimensions, bolt hole spacing, bolt size, mounting surface strength, fastener setup, anchor spacing, tie-down angle, and required Working Load Limit before installation. Each anchor is only as strong as the structure and hardware it is mounted to.
Brophy LRB5 D-ring tie down anchor 4 pack, LRB5 lot of 4, 3/8 bolt on D-ring set, zinc plated trailer tie down anchors, cargo control anchor set, trailer floor D-ring 4 pack, truck bed tie down anchor set, 6000 lb break strength D-ring, 2000 lb WLL tie down ring, forged steel D-ring anchor, surface mount trailer D-ring, carriage bolt D-ring bracket, heavy duty trailer tie down hardware, LOTOF4 Brophy D-ring anchors, four pack trailer tie down rings, equipment trailer cargo anchors

Related Parts & Kits

Check fitment, measurements, and kit contents before ordering. Related parts may not be required for your repair.
Looking up part numbers in our catalog…
Your repair list1 item selected

Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.

BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH Ariah Granados Ariah’s handwritten signature
DIGITAL PRESENTATION & DEVELOPMENT Ken Martin Ken’s handwritten signature
ONLINE SALES & QUALITY ASSURANCE Rayn Fisher
WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTSGOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke HeiserOCT 2026
RV KEYSGOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa ROCT 2026
AXLE & LEAF SPRINGSGOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory StrubertOCT 2026
Showing 3 of 50

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.