POWERED BY R&P CARRIAGES

LaVanture

6" Stainless Steel T-Style Door Holder Latch for Enclosed Trailer (LDH5006SS)

$13.64
Available to order

Enter the quantity you need to check availability.

Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: LDH5006SS
PRODUCT INFORMATION

Product Details

Trailer & RV Door Hardware

6" Stainless Steel T-Style Door Holder Latch for Enclosed Trailer, RV & Camper | Rust-Free 304 Grade Door Catch Hook

Heavy-duty rust-resistant door latch designed to secure entry and cargo doors in the open position.

Part Number: LDH5006SS Universal Fit for Trailers, RVs, and Campers 304 Stainless Steel

Overview

This 6-inch T-Style door hold back is a critical safety and convenience component for any mobile unit. Constructed from high-grade stainless steel, it is designed to withstand the rigors of the road and constant exposure to the elements. It provides a secure mechanical lock that prevents doors from slamming shut in high winds or vibrating against the vehicle body, protecting both your door hinges and exterior finish.

R&P Service Insight

We recommend stainless steel for all exterior trailer hardware to prevent "bleeding" rust streaks.

  • Clearance: 6" length allows the door to clear handles and flares.
  • Security: T-style hook offers a more secure lock than friction latches.
  • Durability: 304/316 grade steel resists road salt and moisture.

R&P Knowledge Hub

Compatibility: Standard fitment for enclosed cargo trailers, horse trailers, and RV entry doors.

Vehicle / System Fit: Universal mounting for flat-wall applications.

Installation Notes: Verify your existing hole pattern (3-hole or 4-hole) before drilling. Use butyl tape to seal mounting points.

Performance Insight: The mechanical hook design is superior for windy environments where friction-based stops often fail.

Brand & Fitment Note

Selling Brand: R&P Carriages

Application Reference: Any OEM or platform names in this listing describe compatibility, fitment target, or application style only where supported by verified dimensions, mounting points, and configuration details.

What This Means: This listing is for an R&P Carriages LDH5006SS door hold back component, not a guaranteed OEM-branded item unless specifically stated.

Before Ordering: Verify measurements, mounting style, and arm length to ensure clearance of your specific door hardware before installation.

R&P Repair Insight

Before finalizing your installation or replacement, perform these critical checks to ensure long-term performance and water-tightness:

  • Dry Fit Check: Ensure the hook sits level in the keeper when the door is fully open to prevent binding.
  • Fastener Selection: Always use stainless steel screws to avoid galvanic corrosion between the latch and the fastener.
  • Moisture Barrier: Apply a dab of sealant or butyl tape behind the base plates to prevent trailer wall delamination.

Features

Premium Stainless Construction

High-grade steel prevents rust streaks and provides superior strength compared to plastic or zinc alternatives.

Extended 6-Inch Reach

Specifically sized to allow doors to clear obstructions like fenders, grab handles, or custom trim.

Positive Mechanical Lock

The T-Style hook snaps firmly into the keeper, ensuring the door stays put even on unlevel ground.

Universal Mounting Base

Standard hole patterns make this an ideal direct replacement for most factory-installed hold backs.

Specifications

Specification Detail
Part Number LDH5006SS
Brand R&P Carriages
Product Type Door Hold Back Hook
Application Exterior Doors
Material 304/316 Stainless Steel
Arm Length 6 Inches
Style T-Style (Hook & Keeper)
Finish Polished Stainless

Fitment / Application

Category Details
Vehicle Type Enclosed Trailers & RVs
Primary Fit Side entry doors
Secondary Fit Utility and Cargo doors
Notes Verify arm length to ensure clearance of your specific door hardware.

Included Components

Quantity Item
1 6" Stainless Steel T-Style Hook with Mounting Base
1 Stainless Steel Keeper / Catch Plate
Note Mounting hardware (screws) sold separately or use existing fasteners.
Verification Note: Please measure your existing latch arm length. While 6" is standard for many trailers, some low-profile or aerodynamic trailers may require shorter 4" versions. Verify hole spacing matches your application if you intend to reuse existing mounting holes.

Related Parts & Kits

Check fitment, measurements, and kit contents before ordering. Related parts may not be required for your repair.
Looking up part numbers in our catalog…
Your repair list1 item selected

Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.

BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH Ariah Granados Ariah’s handwritten signature
DIGITAL PRESENTATION & DEVELOPMENT Ken Martin Ken’s handwritten signature
ONLINE SALES & QUALITY ASSURANCE Rayn Fisher
WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTSGOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke HeiserOCT 2026
RV KEYSGOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa ROCT 2026
AXLE & LEAF SPRINGSGOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory StrubertOCT 2026
Showing 3 of 50

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.