POWERED BY R&P CARRIAGES

Dexter

1750lb Torsion Half Axle Right Passenger Side 22 Down 3500 lb Pair 5-4.5 Hubs (1448734)

$357.42
Available to order

Enter the quantity you need to check availability.

Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: 1448734
PRODUCT INFORMATION

Product Details

TRAILER SUSPENSION / INDEPENDENT HALF AXLE

1750lb Torsion Half Axle Right Passenger Side 22 Down 3500 lb Pair 5-4.5 Hubs

A heavy-duty independent suspension solution for trailers, campers, and utility dollies designed for superior ground clearance and customizable floor layouts.

Part Number: 1448734 1,750 lb Capacity 5 on 4.5" Bolt Pattern

Overview

This 1,750 lb torsion half-axle utilizes internal rubber cords to dampen road shock, eliminating the need for leaf springs and shackles. The 22° down starting angle sits the spindle lower than the axle tube, providing roughly 3-4 inches of extra frame lift compared to neutral axles—perfect for off-road builds or trailers requiring high ground clearance.

R&P Service Insight

Half axles are a "fabricator's favorite" because they allow for open-center trailer designs. However, precision during installation is key to tire longevity.

  • Trailing Arm: Must be installed so the arm points toward the REAR of the trailer.
  • Mounting: Ensure the trailer frame is reinforced; half axles concentrate torque on a smaller area than full axles.
  • Ride Height: Expect the 22° down angle to level out toward 0° when the trailer is fully loaded.

R&P Knowledge Hub

Compatibility: Standard 5 on 4.5" bolt pattern fits most 13", 14", and 15" trailer wheels.

Suspension Style: Progressive rate rubber torsion provides a quieter, smoother ride than traditional leaf springs.

Installation Notes: This is the Passenger Side axle. It must be paired with the corresponding Driver Side unit to achieve a 3,500 lb GVWR.

Independent Travel: Since each side is independent, road bumps on one side will not affect the stability of the opposite wheel.

R&P Build Insight

Measuring for "Fit" is critical when using torsion half axles in custom projects.

  • Stub Length: Verify the 24" length from the hub face to the tube end fits your frame width.
  • Alignment: Use a string or laser to ensure the spindles are perfectly perpendicular to the trailer tongue to prevent tire scrub.
  • Brake Ready: Includes a standard flange for 10" brake assemblies (Electric or Hydraulic).

Features

22° Down High Clearance

Optimized for off-road or high-profile trailers, providing 3-4 inches of additional lift over neutral axles.

Maintenance-Free Cords

Four natural rubber cords inside the tube provide the spring rate without any metal-on-metal wear points.

Integrated Brake Flange

Features a standard flange, making it easy to add 10" electric or hydraulic brakes.

Open Center Design

Eliminates the center axle beam, allowing for drop-floors, water tanks, or lower cargo storage areas.

Specifications

Specification Detail
Part Number 1448734
Load Capacity 1,750 lbs (Per Side)
Starting Angle 22° Down
Bolt Pattern 5 on 4.5"
Spindle Type #84 (1-3/8" x 1-1/16")
Stub Length Approx. 24 Inches
Lift Height Approx. 3-4" vs 0° Axle

Fitment / Application

Category Details
Side Orientation Right Hand / Passenger / Curb Side
Configuration Trailing Arm (Arm points to rear)
Primary Application Utility, Enclosed, Off-Road Trailers
System Pairing Pairs with Left Hand Side for 3,500lb GVWR

Included Components

Quantity Item
1 1,750 lb Torsion Half Axle - Right Passenger Side
Included Spindle & Hub Assembly
Integrated Standard Brake Flange
Safety Note: Torsion axles must be oriented correctly so the torsion arm trails behind the axle tube. Installing these as "leading arms" (pointing forward) will result in suspension failure and loss of control. Ensure your trailer frame is capable of handling independent torsion mounting.

Related Parts & Kits

Check fitment, measurements, and kit contents before ordering. Related parts may not be required for your repair.
Looking up part numbers in our catalog…
Your repair list1 item selected

Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.

BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH Ariah Granados Ariah’s handwritten signature
DIGITAL PRESENTATION & DEVELOPMENT Ken Martin Ken’s handwritten signature
ONLINE SALES & QUALITY ASSURANCE Rayn Fisher
WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTSGOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke HeiserOCT 2026
RV KEYSGOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa ROCT 2026
AXLE & LEAF SPRINGSGOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory StrubertOCT 2026
Showing 3 of 50

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.