At a Glance
- SKU: DBC-2250-E-L

Left hand Kodiak E-coated trailer disc brake caliper assembly with stainless steel 2-1/2" piston, ceramic brake pads, bleed screws, and mounting hardware for compatible heavy-duty 8K to 14K trailer brake applications.
This listing is for one left hand Kodiak DBC-2250-E-L disc brake caliper assembly. The caliper is E-coated for corrosion resistance and is supplied loaded with non-asbestos ceramic friction pads for one rotor. Designed for heavy-duty trailer disc brake systems, this caliper features a 2-1/2" stainless steel piston and low-drag caliper design to help reduce brake heat during operation.
Brake caliper fitment should always be verified before ordering, especially on heavy-duty trailer axle systems where rotor size, caliper side, and piston size matter.
Compatibility: Fits heavy-duty Kodiak disc brake applications in the 8,000 lb to 14,000 lb axle range when the brake system, rotor, piston size, and caliper side match.
Vehicle / System Fit: Commonly used with heavy-duty trailer disc brake systems using 13" to 15" rotors.
Installation Notes: Bleed screws are included. Always bleed the hydraulic brake system properly after caliper replacement.
Performance Insight: Kodiak low-drag calipers retract the piston farther than many standard designs, helping the brake run cooler under proper operating conditions.
Selling Brand: Kodiak
Application Reference: Left hand E-coated disc brake caliper with 2-1/2" stainless steel piston for compatible heavy-duty trailer axle disc brake systems.
Known Assembly References: Kodiak 11" disc brake assemblies 071-2H-11-8D-5HD-REER and 071-2H-11-8D-9HD-REER.
Before Ordering: Verify left hand orientation, axle rating, rotor diameter, piston size, and brake assembly compatibility before purchase.
Replacing a trailer disc brake caliper is not just a part swap. Inspect the rotor, pads, hydraulic lines, actuator performance, and brake fluid condition while the system is apart.
Protective E-coat finish helps improve longevity and corrosion resistance in trailer brake service environments.
Built with a 2-1/2" stainless steel piston for heavy-duty hydraulic disc brake applications.
Includes non-asbestos ceramic friction pads for one rotor, covering compatible 13" to 15" rotor diameter applications.
Kodiak low-drag design helps retract the piston farther than many other designs, supporting cooler brake operation.
| Specification | Detail |
|---|---|
| Part Number | DBC-2250-E-L |
| Listing SKU | DBC-2250-E-L |
| Brand | Kodiak |
| Product Type | Left Hand Disc Brake Caliper Assembly |
| Quantity Included | 1 caliper assembly with pads and hardware |
| Axle Rating Range | 8,000 lb to 14,000 lb trailer axle applications, where compatible |
| Finish | E-Coated |
| Piston Diameter | 2-1/2" stainless steel piston |
| Brake Pads | Non-asbestos ceramic friction pads |
| Category | Details |
|---|---|
| Vehicle / System | Trailer hydraulic disc brake system |
| Primary Fit | 8KHD, 10K, and 12K axle disc brake applications where DBC-2250-E-L is specified |
| Rotor Diameter | Fits 13" to 15" rotor diameter applications |
| Notes | Verify left hand orientation, rotor size, piston size, and Kodiak assembly compatibility before ordering. |
| Key Detail | Specification |
|---|---|
| Caliper Side | Left Hand |
| Piston Diameter | 2-1/2" |
| Piston Material | Stainless Steel |
| Brake Pads | Non-asbestos ceramic friction pads |
| Rotor Diameter Range | 13" to 15" |
| Testing / Design | Kodiak calipers are 100% high and low pressure tested and built with a low-drag design. |
| Quantity | Item |
|---|---|
| 1 | Left hand E-coated Kodiak disc brake caliper with bleed screws included |
| 1 Set | Ceramic brake pads for one 13" to 15" rotor |
| 2 | Steel bolts and plates |
| Included | Mounting hardware for compatible Kodiak disc brake applications |
Thank You For Choosing R&P Carriages As Your Online Shopping Source!
Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.
Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.
815-357-3292 · 270 E Jackson St · Seneca, IL 61360
Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.
Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.
Found the correct RV keys at a good price with free shipping; the keys worked as expected.
Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.
Praised the OEM and aftermarket selection, discounts, quick shipping, and friendly parts staff.
Got the axle he needed right away, set up with a custom spring perch.
Praised the polite staff and quality welding on a project.
Replacement struts brought a long-used door back to working order.
Had a trailer built to his needs at a fair price, then found parts for two other trailers in stock.
Praised the customer service after working with R&P over several years.
Found the gas shock he wanted at a good price with shipping included.
Received swivel D-rings with backing plates and praised the price, correct order, and service.
The right parts arrived the first time, with fast delivery and helpful staff.
Said project advice and prompt shipping helped finish a trailer project.
Reported helpful service and fast shipment to Germany.
Praised a suspension kit, fair pricing, and good parts.
Was pleased with a replacement trailer cord.
Noted dependable service and products across repeat visits.
Said the axle installation fit perfectly and thanked Josh and the crew.
Praised the crew’s professionalism during a difficult hitch replacement.
Liked the product, price, communication, and shipping.
Said the product description explained what would work for the trailer.
Received the item as described with very fast shipping and plans to return.
Praised accurate description, quick shipping, and clear communication.
Was happy with the product and its price.
Called it a pleasure doing business with R&P.
Was pleased with product quality, quick delivery, and an easy installation.
Was enthusiastic about the products.
Was ready to install the product on every trailer they own.
Expected to buy again after a good experience.
Reported that the newly installed parts were working perfectly.
Said things went well, as they had on previous visits.
Praised clear communication and fair value.
Said the transaction went as expected.
Noted good value, careful packing, and fast shipping.
Found the team professional and easy to work with.
Praised fast shipping and good communication.
Shared appreciation for the owners and their company.
Reported prompt shipping and said they would buy again.
Found R&P easy to deal with.
Praised the people and the service.
Reported a good fit, fair price, accurate listing, and quick shipping.
Received the order a day early and recommended the seller.
Described a no-hassle, professional custom-trailer purchase.
Praised a new trailer, custom additions, helpful staff, and clear pricing.
Found the right hub covers quickly and got helpful maintenance advice.
Said R&P helped their company get back on the road after an axle problem.
Was happy with a dump-trailer purchase after comparing options.
Received clear help choosing brake assemblies and bearing seals, followed by fast shipping.
Found a good deal on a 16-foot dump trailer and planned to return.
Thanked the staff for their patience and recommended the shop.
Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.