Eight (8) Dexter 1/2"-20 x 2" Press-In Trailer Wheel Studs
Part Number: 007-122-00x8
These genuine Dexter 1/2"-20 x 2" press-in wheel studs are the exact replacements used in many Dexter hub and drum assemblies. Whether you’re refreshing an older hub, replacing damaged hardware, or restoring correct clamping force after a wheel issue, this pack of eight OEM studs ensures a proper fit and reliable, long-term performance.
Trailer wheel studs play a critical role in maintaining safe torque, secure wheel seating, and long bearing life. Using the correct OEM-spec stud size is essential—especially on trailers that see heavy loads, long distances, or braking heat. This set gives you everything required to re-stud a single hub or selectively replace worn studs across your setup.
Features
- OEM Dexter replacement studs — correct knurl and shoulder length for proper seating
- Standard 1/2"-20 thread size used on thousands of trailer hubs
- 2" stud length ideal for steel trailer wheels and most aftermarket rims
- Press-in shank ensures a tight, non-rotating fit in the hub flange
- Heat-treated construction for durability under load and braking stress
- Sold as a pack of eight (8) — enough for one full hub replacement
Specifications
| Specification | Detail |
|---|---|
| Thread Size | 1/2"-20 (fine thread) |
| Overall Stud Length | 2" |
| Stud Type | Press-in, splined shank |
| Compatibility | Many Dexter hubs & drums (verify fitment) |
| Quantity | Eight (8) studs |
Fitment varies by hub model. For best results, match your existing stud’s shoulder length, spline diameter, and thread length. If you’re replacing studs after a wheel separation, damaged threads, or over-torqueing, consider replacing the full set to restore even clamp load.