POWERED BY R&P CARRIAGES

LaVanture

Gas Spring SPD-GSNI-5000-60 or LGP6-100-60 Strut Prop Rod RV Camper Hatch Door (LGP6-100-60)

$23.99
Available to order

Enter the quantity you need to check availability.

Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: LGP6-100-60
PRODUCT INFORMATION

Product Details

Gas Spring Strut Rod / Hatch Support / RV & Trailer Hardware

Gas Spring SPD-GSNI-5000-60 or LGP6-100-60 Strut Prop Rod RV Camper Hatch Door

Replacement gas spring strut rod for compatible hatches, covers, camper compartments, RV doors, trailer doors, toolbox lids, and similar lift-support applications where the length, stroke, force, and end style match.

Part Reference: LGP6-100-60 10.00" Extended Length 3.00" Stroke / 60 lb Force

Key Measurements & Specs

Specification Detail
Part Reference SPD GSNI-5000-60 / LGP6-100-60
Product Type Gas spring strut rod / lift support
Extended Length 10.00"
Stroke 3.00"
Compressed Length 6.41" reference dimension
Force Rating 60 lb force
End Style Standard 10mm ball socket-style ends with locking clips
Material / Finish Steel gas spring with black nitride shaft finish
Quantity Included 1 gas spring strut rod

Fitment / Application

Category Details
System Lift-support applications using compact gas spring struts
Common Uses Hatches, covers, RVs, campers, trailer doors, compartment doors, toolbox lids, and similar applications
Primary Fit Compatible replacement where 10.00" extended length, 3.00" stroke, 60 lb force, and 10mm end fittings match
Fitment Method Match the original strut number, extended length, compressed length, stroke, force rating, and ball stud size before ordering
Important Note Gas springs are application-sensitive. Do not order by part number alone if your original measurements or force rating are different.

Top Features

Feature Buyer Benefit
Black Nitride Shaft Provides added corrosion resistance and a clean black appearance for visible applications
60 lb Force Supports compatible hatches, doors, covers, and lids requiring a 60 lb lift-support rating
10mm Ends Fits common 10mm ball stud mounting points when the original hardware matches
Replacement Reference Useful for matching SPD GSNI-5000-60, LGP6-100-60, and compatible cross-reference applications

Overview

This black nitride gas spring strut rod is a compact lift-support replacement for compatible hatch, cover, RV, camper, trailer door, compartment door, and toolbox lid applications. It is commonly referenced as SPD GSNI-5000-60 or LGP6-100-60 and is intended for installations requiring a 10.00" extended gas spring with a 3.00" stroke, 60 lb force rating, and standard 10mm end fittings.

R&P Service Insight

Gas springs need to match more than just the general size. A strut that is too weak may not hold the door or hatch open, while a strut that is too strong can make the panel difficult to close or place extra stress on the mounting points.

  • Match the Force: Replace a 60 lb strut with a 60 lb strut unless the application has been intentionally changed.
  • Measure Fully Extended: Confirm the original strut is 10.00" from center of socket to center of socket when extended.
  • Check the Ends: Confirm your application uses 10mm ball stud mounting points and compatible socket-style ends.

R&P Knowledge Hub

Compatibility: This gas spring is intended as a replacement reference for compatible SPD GSNI-5000-60 / LGP6-100-60 style applications where the measurements, force rating, and end fittings match.

Vehicle / System Fit: Common applications include RV compartments, camper doors, hatch covers, trailer access doors, toolbox lids, fold-down panels, and other light lift-support uses.

Installation Notes: Gas springs are under pressure. Do not puncture, heat, cut, bend, or attempt to open the cylinder. Support the hatch, lid, or door before removing the old strut.

Performance Insight: The black nitride shaft gives the strut a clean black appearance and added corrosion resistance, making it a strong option where appearance and durability both matter.

Brand & Fitment Note

Selling Brand: R&P Carriages replacement gas spring strut rod.

Application Reference: SPD GSNI-5000-60 and LGP6-100-60 are used as compatibility and cross-reference part numbers for matching applications.

What This Means: This listing is for one replacement gas spring strut rod, not a guaranteed OEM-branded item unless specifically stated on the product packaging or order documentation.

Before Ordering: Verify your original part number, extended length, compressed length, stroke, force rating, end style, and ball stud size before installation.

R&P Repair Insight

When replacing gas springs on a hatch, lid, or compartment door, inspect the mounting hardware at the same time. A new strut will not correct bent brackets, worn ball studs, loose fasteners, or misaligned mounting points.

  • Replace in Pairs When Used in Pairs: If your hatch uses two struts, replacing both sides together helps keep lift force even.
  • Check Mounting Studs: Make sure the 10mm ball studs are not worn, loose, bent, or corroded.
  • Confirm Orientation: Install in the same orientation as the original application unless your equipment manufacturer specifies otherwise.

Features

60 lb Lift-Support Force

Built for applications that require a 60 lb gas spring force rating. Always match the original rating unless the application has been professionally changed.

10.00" Extended Length

Designed for compact hatch, cover, lid, and compartment applications using a 10.00" extended gas spring.

3.00" Stroke

Provides the travel needed for compatible lift-support applications where the original strut uses a 3.00" stroke.

Black Nitride Shaft Finish

Combines a clean black appearance with added corrosion resistance for RV, camper, trailer, hatch, and cover use.

Included Components

Quantity Item
1 Black nitride gas spring strut rod - GSNI-5000-60 / LGP6-100-60 reference
Included on strut Standard 10mm socket-style ends with locking clips
Not Included Mounting brackets, ball studs, screws, and additional installation hardware unless shown or stated separately
Important Fitment Note: Verify the original gas spring part number, extended length, compressed length, stroke, force rating, ball stud size, and mounting style before ordering. Gas springs are pressurized components. Do not cut, puncture, heat, bend, or attempt to open the cylinder. Application references are used for compatibility only and do not guarantee OEM-branded status.
Black nitride gas spring strut rod GSNI-5000-60 LGP6-100-60, SPD GSNI-5000-60 replacement reference, LGP6-100-60 gas spring, 10 inch gas spring, 3 inch stroke gas spring, 60 lb gas strut, 10mm end gas spring, RV hatch strut, camper hatch gas spring, trailer door strut, compartment door gas spring, toolbox lid gas spring, black nitride lift support.

Related Parts & Kits

Check fitment, measurements, and kit contents before ordering. Related parts may not be required for your repair.
Looking up part numbers in our catalog…
Your repair list1 item selected

Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.

BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH Ariah Granados Ariah’s handwritten signature
DIGITAL PRESENTATION & DEVELOPMENT Ken Martin Ken’s handwritten signature
ONLINE SALES & QUALITY ASSURANCE Rayn Fisher
WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTSGOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke HeiserOCT 2026
RV KEYSGOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa ROCT 2026
AXLE & LEAF SPRINGSGOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory StrubertOCT 2026
Showing 3 of 50

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.

R&P Knowledge Hub

Gas Spring Reference

Review this gas spring or compare another SPD / GSNI spring by extended length, family and force rating.

Current Gas Spring
Force
Extended
Compressed
Stroke
Rod / Tube
Compare another gas spring
How to measure a gas spring
EXTENDED LENGTH — CENTER TO CENTER TUBE ROD STROKE

Extended: measure center-to-center with the spring fully extended.

Compressed: measure center-to-center with the spring fully compressed.

Stroke: the distance the rod travels between compressed and extended positions.

Force: match the printed force rating whenever possible.

Reference Match

Force
Extended
Compressed
Stroke
Rod / Tube
Standard End

Reference only: verify the printed product number, force, extended length, compressed length, stroke, rod diameter, tube diameter and end fitting before ordering.