Trailer Jack Sand Foot – 2" Jack Tube – 8" Extension
Trailer jack sand foot designed to fit most standard round tube trailer jacks rated from 1,000 lb to 5,000 lb. Provides additional height and stability when supporting the trailer tongue.
R&P Knowledge Hub
Jack sand feet help distribute trailer tongue weight over a larger surface area to prevent the jack from sinking into sand, gravel, or soft ground. They also reduce the amount of jack travel required on trailers with higher tongue heights.
Features
- Fits standard 2 inch round tube trailer jacks
- Compatible with most 1,000 lb – 5,000 lb jacks
- Spring loaded hitch pin attachment
- Zinc plated finish for corrosion resistance
Specifications
| Specification | Detail |
| Mount Inside Diameter | Approximately 2-1/16" |
| Overall Height | Approximately 9" |
| Pin Height From Ground | Approximately 8" |
| Attachment Method | 1/4" Spring Loaded Hitch Pin |
Verify jack tube diameter before installation.
You are looking at a NEW, "Sand Foot" for your trailer jack. It fits almost all standard trailer jacks from 1,000# up to 5,000# with the standard round tube body. It attaches with a 1/4" spring loaded hitch pin for easy on, and easy off, into the existing hole in the bottom of your jack. Plated for rust protection.
The ID of the mount is just over 2 1/16" to slip over a standard 2" jack. This jack foot is almost 9" tall overall, with the attachment pin just over 8" off the ground. If your trailer has a high tongue, this will extend the jack 8" so you dont have to put blocks under it every time you jack the trailer, and saving about a "bazillion" cranks of the jack handle just to get it down to the ground!