POWERED BY R&P CARRIAGES

Need a Trailer Part

Kodiak 1/8" ID Rubber Trailer Brake Hose – 3/16" Male Swivels – 192" (BH-3MFS-192)

$39.99
Available to order

Enter the quantity you need to check availability.

Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: BH-3MFS-192
PRODUCT INFORMATION

Product Details

Trailer Hydraulic Brake Hose

Kodiak 1/8" ID Rubber Trailer Brake Hose – 3/16" Male Swivels – 192"

Flexible 16-foot DOT brake hose with swiveling brass fittings and stainless steel flares for compatible trailer hydraulic brake systems.

Part Number: BH-3MFS-192 192" Overall Length 1/8" ID Rubber Hose

Key Measurements & Specs

Specification Detail
Part Number / SKU BH-3MFS-192
Brand Kodiak
Product Type Flexible hydraulic brake hose
Overall Length 192" / 16'
Hose Inside Diameter 1/8"
End Fittings Two male brass inverted-flare swivel fittings
Fitting Size 3/16" fittings with 3/8"-24 threads
Flare Material Stainless steel
Quantity Included One brake hose

Fitment / Application

Category Details
System Compatible trailer hydraulic brake systems
Common Connections Trailer disc brake calipers, wheel cylinders, master cylinders and solenoid valves with matching connections
Primary Fit Components accepting compatible 3/16" male inverted-flare fittings with 3/8"-24 threads
Fitment Method Match hose length, fitting type, flare style and thread size to the existing brake system
Important Note Confirm the required 192" length and both connection points before ordering

Top Features

Feature Buyer Benefit
Swiveling Ends Help prevent the hose from twisting during installation
Stainless Steel Flares Eliminate the tendency of brass flares to split while tightening
Open Fitting Area Provides additional room for properly positioning line wrenches
Extended Thread Engagement Kodiak fittings provide 40% more thread engagement than industry-standard fittings for a stronger, more secure connection

Overview

The Kodiak BH-3MFS-192 is a flexible rubber brake hose measuring 192 inches, or 16 feet, long with a 1/8-inch inside diameter. Each end has a swiveling male brass inverted-flare fitting with a stainless steel flare and 3/8"-24 thread. The connection style fits many compatible trailer disc brake calipers, wheel cylinders, master cylinders and solenoid valves.

R&P Service Insight

Long flexible brake hoses can simplify routing where a rigid brake line is impractical, but the correct connections and careful routing remain essential.

  • Check Both Ends: Confirm that both components accept the hose’s male inverted-flare fittings and 3/8"-24 threads.
  • Plan the Route: Keep the hose clear of sharp edges, excessive heat and moving suspension or brake components.
  • Avoid Twisting: Use the swiveling fittings to position the hose without winding or twisting the rubber line.

R&P Knowledge Hub

Compatibility: Designed for compatible trailer hydraulic brake components using matching 3/16" male inverted-flare connections with 3/8"-24 threads.

System Fit: Common compatible connection points include trailer disc brake calipers, hydraulic wheel cylinders, master cylinders and solenoid valves. Verify the connections on the specific system before ordering.

Installation Notes: The swiveling fitting ends help prevent hose twist and leave additional open space for line-wrench access during installation.

Performance Insight: Kodiak uses stainless steel flares to eliminate the tendency of brass flares to split during tightening. The brass fittings also provide 40% more thread engagement than industry-standard fittings for stronger, more leak-resistant connections.

Brand & Fitment Note

Selling Brand: Kodiak

Product Identification: BH-3MFS-192 flexible rubber brake hose with two male swivel fittings.

Application Reference: Brake calipers, wheel cylinders, master cylinders and solenoid valves are compatibility references only. The actual connection requirements must match the listed fitting and thread specifications.

Before Ordering: Verify the required hose length, inside diameter, inverted-flare connection style, fitting gender and 3/8"-24 thread size.

R&P Repair Insight

A brake hose must be correctly routed and securely connected to maintain a dependable hydraulic brake system. Inspect the complete route and both attachment points before installation.

  • Connection Check: Do not assume all trailer brake components use the same flare style or fitting gender. Compare both ends with the listed specifications.
  • Length Check: Confirm that 192 inches provides the required route without stretching the hose or leaving it where it can drag, rub or become pinched.
  • Final Inspection: After installation, bleed the hydraulic brake system and inspect every connection for fluid leakage before operating the trailer.

Features

Flexible 16-Foot Brake Hose

The 192-inch rubber hose provides a flexible hydraulic connection for compatible trailer brake-system layouts.

Male Swivel Connections

Two swiveling male brass inverted-flare fittings help prevent the hose from twisting during installation.

Stainless Steel Flares

Stainless steel flares eliminate the tendency of brass flares to split while the fittings are being tightened.

Greater Thread Engagement

Kodiak fittings provide 40% more thread engagement than industry-standard fittings, creating a stronger and more leak-resistant connection.

Included Components

Quantity Item
1 Kodiak 1/8" ID flexible rubber brake hose, 192" long
2 Attached male brass inverted-flare swivel fittings with stainless steel flares and 3/8"-24 threads
Important Fitment Note: Verify that the required hose length is 192" and that both connection points accept compatible 3/16" male inverted-flare fittings with 3/8"-24 threads. Route the hose away from sharp edges, heat sources and moving components. The hydraulic brake system must be properly bled and inspected for leaks after installation.
Kodiak BH-3MFS-192 brake hose, Kodiak 192 inch brake hose, 16 foot trailer brake hose, 1/8 inch ID rubber brake hose, 3/16 inch male swivel brake hose, 3/8-24 inverted flare brake hose, flexible trailer hydraulic brake line, trailer disc brake caliper hose, wheel cylinder brake hose, master cylinder brake hose, solenoid valve brake hose, DOT flex brake hose

Related Parts & Kits

Check fitment, measurements, and kit contents before ordering. Related parts may not be required for your repair.
Looking up part numbers in our catalog…
Your repair list1 item selected

Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.

BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH Ariah Granados Ariah’s handwritten signature
DIGITAL PRESENTATION & DEVELOPMENT Ken Martin Ken’s handwritten signature
ONLINE SALES & QUALITY ASSURANCE Rayn Fisher
WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTSGOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke HeiserOCT 2026
RV KEYSGOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa ROCT 2026
AXLE & LEAF SPRINGSGOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory StrubertOCT 2026
Showing 3 of 50

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.