|
MAT Prepacked Bearing Kit Family
MAT / BEK-7.0K Trailer Wheel Bearing Kit — Fits 7,000 lb AxlesComplete one-hub bearing kit for many 7,000 lb trailer axles using a 1.25" x 1.750" tapered spindle.
This complete bearing kit is used on many 7,000 lb axles that utilize a 1.25" x 1.750" tapered spindle. Includes bearings, races, a double-lip 10-225 grease seal, tang washer, and cotter pin in a clean factory-packed format that is easier to identify and store than loose individual components. |
|
Shop the BEK Kit FamilyMAT prepacked bearing kits give trailer owners and service buyers a clean, retail-sealed option across the most common axle ratings.
|
Why Choose the Prepacked MAT Version?
Retail-Sealed FormatFactory-packed presentation is cleaner and easier to identify than loose parts in a bag or bin. |
Grab-and-Go ConvenienceWell suited for quick service, counter sales, emergency spare kits, and DIY maintenance. |
Easy Spare StorageA prepacked kit stores neatly in a toolbox, trailer compartment, or service truck without loose hardware getting separated. |
Fast Visual VerificationClear axle, spindle, bearing, and seal callouts help buyers verify fitment before teardown or installation. |
R&P Knowledge Hub
Compatibility: Fits many 7,000 lb trailer axle hubs using a 1.25" x 1.750" tapered spindle with 14125A outer bearing, 25580 inner bearing, 14276 outer race, 25520 inner race, and 10-225 double-lip grease seal.
Vehicle / System Fit: Common on cargo, livestock, equipment, and utility trailers built around this 7K bearing and race combination.
Installation Notes: One kit services one hub. Order two kits per axle. Always verify your spindle measurements and existing bearing numbers before ordering.
Performance Insight: This 7K setup uses the 14125A outer bearing stack, making it distinct from lower-capacity kits while keeping the same 25580 inner bearing used in several heavier tapered-spindle applications.
R&P Service Insight
These kits are commonly replaced during routine wheel-end service, after seal failure, when grease becomes contaminated, or when teardown shows roughness, heat discoloration, scoring, or visible wear in the bearings or races.
- Wear: Bearings and seals gradually lose tolerance through normal rotation, repeated towing cycles, and heat buildup over time.
- Exposure: Moisture, road grit, and dirty or broken-down grease can accelerate corrosion and premature wheel-end wear.
- Service Reality: A DIY owner may also need fresh grease, replacement dust caps, spindle hardware, or related hub and brake parts depending on what is found during disassembly.
Prepacked vs. Loose Bearing Kits
What a DIY Trailer Owner May Also Need
Common Service Items
|
Possible Additional Parts
|
Features
- Complete one-hub service kit for many 7,000 lb trailer axles
- Fits 1.25" x 1.750" tapered spindle applications using 14125A / 25580 bearings
- Includes matched races, double-lip seal, tang washer, and cotter pin
- Retail-packed format is cleaner to store, easier to identify, and convenient to keep as a service spare
Specifications
Fitment / Application
Included Components
Verify all specifications, measurements, bearing numbers, and seal callouts before installation.
|
MAT Prepacked Bearing Kit Family
MAT / BEK-7.0K Trailer Wheel Bearing Kit — Fits 7,000 lb AxlesComplete one-hub bearing kit for many 7,000 lb trailer axles using a 1.25" x 1.750" tapered spindle.
This complete bearing kit is used on many 7,000 lb axles that utilize a 1.25" x 1.750" tapered spindle. Includes bearings, races, a double-lip 10-225 grease seal, tang washer, and cotter pin in a clean factory-packed format that is easier to identify and store than loose individual components. |
|
Shop the BEK Kit FamilyMAT prepacked bearing kits give trailer owners and service buyers a clean, retail-sealed option across the most common axle ratings.
|
Why Choose the Prepacked MAT Version?
Retail-Sealed FormatFactory-packed presentation is cleaner and easier to identify than loose parts in a bag or bin. |
Grab-and-Go ConvenienceWell suited for quick service, counter sales, emergency spare kits, and DIY maintenance. |
Easy Spare StorageA prepacked kit stores neatly in a toolbox, trailer compartment, or service truck without loose hardware getting separated. |
Fast Visual VerificationClear axle, spindle, bearing, and seal callouts help buyers verify fitment before teardown or installation. |
R&P Knowledge Hub
Compatibility: Fits many 7,000 lb trailer axle hubs using a 1.25" x 1.750" tapered spindle with 14125A outer bearing, 25580 inner bearing, 14276 outer race, 25520 inner race, and 10-225 double-lip grease seal.
Vehicle / System Fit: Common on cargo, livestock, equipment, and utility trailers built around this 7K bearing and race combination.
Installation Notes: One kit services one hub. Order two kits per axle. Always verify your spindle measurements and existing bearing numbers before ordering.
Performance Insight: This 7K setup uses the 14125A outer bearing stack, making it distinct from lower-capacity kits while keeping the same 25580 inner bearing used in several heavier tapered-spindle applications.
R&P Service Insight
These kits are commonly replaced during routine wheel-end service, after seal failure, when grease becomes contaminated, or when teardown shows roughness, heat discoloration, scoring, or visible wear in the bearings or races.
- Wear: Bearings and seals gradually lose tolerance through normal rotation, repeated towing cycles, and heat buildup over time.
- Exposure: Moisture, road grit, and dirty or broken-down grease can accelerate corrosion and premature wheel-end wear.
- Service Reality: A DIY owner may also need fresh grease, replacement dust caps, spindle hardware, or related hub and brake parts depending on what is found during disassembly.
Prepacked vs. Loose Bearing Kits
What a DIY Trailer Owner May Also Need
Common Service Items
|
Possible Additional Parts
|
Features
- Complete one-hub service kit for many 7,000 lb trailer axles
- Fits 1.25" x 1.750" tapered spindle applications using 14125A / 25580 bearings
- Includes matched races, double-lip seal, tang washer, and cotter pin
- Retail-packed format is cleaner to store, easier to identify, and convenient to keep as a service spare
Specifications
Fitment / Application
Included Components
Verify all specifications, measurements, bearing numbers, and seal callouts before installation.