R&P Tandem-Axle Wet Bolt & Bronze Bushing Rebuild Kit with 7-3/4" Equalizers (SRK-TA-WB-BB-E34)

$122.96

Most items ship free — select items ship for $6.39

Out of Stock

Tandem-Axle Double-Eye Suspension Rebuild Kit

R&P Tandem-Axle Wet Bolt & Bronze Bushing Rebuild Kit with 7-3/4" Equalizers

A complete R&P assembled suspension hardware kit for compatible tandem-axle trailers with double-eye leaf springs, 7-3/4" curved equalizers and 2.562" shackle spacing.

SKU: SRK-TA-WB-BB-E34 Greaseable Wet Bolts Dexter Bronze Bushings

Key Measurements & Specs

Specification	Detail
SKU	SRK-TA-WB-BB-E34
Assembled By	R&P Carriages
Product Type	Tandem-axle suspension rebuild kit
Equalizer Size	7-3/4" center to center with 3/4" top pivot hole
Shackle Spacing	2.562" hole center to hole center
Bushing Size	0.575" ID x 0.698" OD x 1.74" long
Quantity Included	1 complete kit for one tandem-axle suspension

Fitment / Application

Category	Details
Suspension Type	Double-eye leaf-spring suspension
Axle Configuration	Tandem axle
Primary Fit	Systems using EQ-E34-style 7-3/4" curved equalizers
Spring Width	Common 1-3/4"-wide double-eye trailer springs; verify all measurements
Fitment Method	Match equalizer length, top-hole diameter, shackle spacing and bolt sizes
Important Note	Not a universal kit; axle capacity alone does not confirm fitment

Top Features

Feature	Buyer Benefit
Greaseable Hardware	Allows routine lubrication at the suspension pivot points
Bronze Bushings	Replaces compatible worn spring-eye and equalizer bushings
Complete Hardware Count	Includes matched quantities for a full tandem-axle rebuild
Heavy Shackle Straps	Eight 0.23"-thick straps replace all four shackle pairs
R&P Assembled	Related suspension components are grouped into one convenient kit

R&P Knowledge Hub

Compatibility: Intended for compatible tandem-axle suspensions with 1-3/4" double-eye springs, 7-3/4" EQ-E34-style equalizers and 2.562" shackle spacing.

System Fit: The 12 bronze bushings service the eight spring eyes and four lower equalizer eyes in a typical tandem-axle arrangement.

Installation Notes: Support the trailer safely, service one controlled section at a time and install the grease fittings where they remain accessible. Tighten hardware using the trailer or component manufacturer's procedure.

Performance Insight: Greaseable bolts allow lubricant to be added at the pivot points; regular inspection and lubrication help manage wear in compatible suspension joints.

R&P Repair Insight

Uneven tire wear, visible shackle wear or excess movement can warrant a close suspension inspection, but measurements—not appearance alone—determine replacement-part fit.

Inspect Together: Check spring eyes, hangers, equalizer mounting points and shackle straps for elongation, cracks or damage.
Do Not Mix Geometry: Changing equalizer or shackle dimensions can alter suspension position and movement.
Lubricate After Assembly: Confirm grease reaches each serviceable pivot and recheck the suspension after initial use according to appropriate service practice.

Features

Full Tandem-Axle Hardware Set

Matched component quantities cover both equalizers, all four shackle pairs and the typical spring-eye/equalizer bushing locations.

Serviceable Wet-Bolt Design

Twelve 9/16"-body step-down wet bolts and two 3/4" equalizer wet bolts provide greaseable pivot hardware.

Bronze Wear Surfaces

Twelve Dexter bronze bushings measure 0.575" ID x 0.698" OD x 1.74" long for compatible spring eyes and equalizers.

Measurement-Led Fitment

Clear 7-3/4" equalizer and 2.562" shackle dimensions make comparison with the existing suspension straightforward.

Included Components

Quantity	Part Number	Included Item
2	EQ-E34	Curved “long banana” equalizers, 7-3/4" lower-hole centers with 3/4" top pivot hole
8	SL-2.562	Heavy shackle straps, 2.562" hole centers, 3.75" x 1.25" x 0.23"
12	FA-7-187	Greaseable step-down wet bolts, approximately 9/16" body x 3" long with 7/16" threaded end
12	FA-6-92Z	7/16" flange nuts for FA-7-187 wet bolts
2	FA-126A1LN	Greaseable equalizer pivot bolts, 3/4" x 3-1/2"
2	FA-3416	3/4" hex nuts for equalizer pivot bolts
12	Dexter 014-077-00	Bronze spring-eye/equalizer bushings, 0.575" ID x 0.698" OD x 1.74" long

Important Fitment Note: This kit is selected by suspension geometry, not axle capacity alone. Before ordering, verify the existing equalizer measures 7-3/4" center to center across the lower holes, has a 3/4" top pivot hole, and works with 2.562" shackle straps and the listed bolt and bushing dimensions. Springs, hangers and U-bolts are not included.

Shop Related Suspension Parts

R&P SRK-TA-WB-BB-E34 tandem axle suspension rebuild kit, trailer wet bolt kit, bronze bushing kit, EQ-E34 equalizer kit, 7-3/4 inch trailer equalizer, 2.562 shackle strap, double eye leaf spring suspension hardware, greaseable trailer suspension kit, Dexter 014-077-00 bronze bushing.