Replace your RIGHT Trailer Brakes with an 8 x 6.5 Dexter Brake Drum and Dexter Backing Plate
Comes with a drum, bearings and seals, a brake shoe, new hardware, a 12x2 Brake backing plate,
EVERY part for one side of an Axle but the tube and springs for 7000# axles!
Over the years, we have worked on THOUSANDS of trailers and have seen lots of failed wheel bearings that take out the drum AND the brakes. Another problem is brakes that have worn the drum, either where the shoes ride, or more often, where the magnet rubs. New magnets will not "grab" strong on grooved drums! This is ALL PARTS you will need for one 8 lug 7000# axle . We almost always replace the entire assembly, it saves times, and when you are done, your brakes WORK again!
1x 8 x 6.5 Brake Drums (9/16" Studs), Race Already Pressed in
(We also have other 8 Lugs Available, Click Here)
1x Right Hand 12" Backing Plate (New Shoe, brake spring, and hardware ready to go!)
1x 15123 Bearing (1.25")
1x 25580 Bearing (1.75")
1x 10-36 Seal (2.25")
1x 10-10 Seal (2.125")
1x 2.71" EZ Lube Dust Cap (Also Works with non-EZ Lube Axles)
8x Matching 9/16" Lug Nuts
We don't just sell them, we install them every day!
Fits both Torsion and leaf spring axles!
Complete brake drum and hub assembly, includes all new bearings, Seals, Dust caps, for one axle.
Complete brake assembly, everything you need to install the complete hub drum and all parts, assembled and ready to bolt on!
If you have a 2.75" OD Tube and a Flange with 5 holes, (to bolt the brake plate to) your axle is the 7000# Axle
If you have a 2.25" axle tube and has a 4 bolt flange it is the 3500# axle.
If you have the smaller 1-5/8" axle tube and has the 4 bolt flange, it has the smaller 2000/2200# axle
Click here to see what size axle you have
Do you need just the left side or both sides? Click here!