10,000 lb General Duty Axle Spindle — Fits Dexter 10K Axles
The TAD10KGD replacement spindle restores strength, alignment, and bearing reliability on Dexter 10K general-duty axles. Built from forged high-carbon steel and machined to precise OEM dimensions, this spindle is suitable for equipment trailers, fleet maintenance, and commercial hauling applications requiring dependable 10K-rated performance.
| Specification | Detail |
|---|---|
| Axle Rating | 10,000 lb General Duty |
| Material | Forged high-carbon steel |
| Outer Bearing Surface | 1.75" |
| Inner Bearing Surface | 2.25" |
| Seal Surface | 2.875" |
| Weight | ~17 lb |
| Includes | Spindle only |
Designed for Dexter 10K GD axles and compatible with equivalent 10K hub, brake, and seal systems from major U.S. manufacturers. Always verify bearing part numbers before ordering.
Applications
- 10K equipment trailers
- Fleet maintenance and repair
- Commercial flatbeds
- Agricultural & industrial applications
- Axle rebuild and fabrication shops
Installation Notes
Remove the damaged spindle approximately 1" from the weld, clean the axle tube, and align the new spindle using proper fixtures. Confirm toe and camber alignment before final welding. Apply a full 360° weld with adequate penetration to meet the 10K load rating. Replace bearings, races, and seals during installation for best performance.
We have replacement Axle Spindle Shafts in stock today!
Click here to watch a real step-by-step spindle replacement demonstration
You might also like
