Add Brakes to Your Trailer Complete Kit 3500 Axle 5 x 4.5 Axle Electric
Part Number - 94545-C-IMP
In order for these brakes to work, you must have a brake controller and a 7 way plug installed in your truck
Measurements from Center Bolt Hole to Center Bolt Hole is 2 7/8" on Backing Plate
This Kit Includes:
TWO - Electric Brake backing plates, 3500# per pair, 10" x 2.25, one left, one right
TWO - New 10" brake drums, 4.5" bolt pattern with races already pressed in (click here for other bolt patterns sizes)
All hardware to attach backing plates to axle mount plate (special 7/16 nuts).
All brake hardware, springs, levers, magnets, shoes, etc.
New inner grease seals
All New Wheel Bearings (Shipping loose with kit):
TWO - 1.7" 10-19 seals
TWO - L44649 bearings
TWO - L68149 bearings
TEN - Matching lug nuts, 1/2-20
TWO - New EZ Lube Dust Caps
25' Ft of 14 Gauge Two Conductor High Tempature Brake Wire (Enough for a 23 ft long trailer!)
Assorted wire connectors and wire ties (Everything you need!)
4.5 Amp Hour, 12 Volt Gel Cell Rechargeable break away battery with built in battery charger
Battery Case to mount to trailer
Pull pin emergency break away switch
New 7 Way Trailer Plug
TWO - New 10" brake drums, 4.5" bolt pattern with races already pressed in (click here for other bolt patterns sizes)
All hardware to attach backing plates to axle mount plate (special 7/16 nuts).
All brake hardware, springs, levers, magnets, shoes, etc.
New inner grease seals
All New Wheel Bearings (Shipping loose with kit):
TWO - 1.7" 10-19 seals
TWO - L44649 bearings
TWO - L68149 bearings
TEN - Matching lug nuts, 1/2-20
TWO - New EZ Lube Dust Caps
25' Ft of 14 Gauge Two Conductor High Tempature Brake Wire (Enough for a 23 ft long trailer!)
Assorted wire connectors and wire ties (Everything you need!)
4.5 Amp Hour, 12 Volt Gel Cell Rechargeable break away battery with built in battery charger
Battery Case to mount to trailer
Pull pin emergency break away switch
New 7 Way Trailer Plug